192.168.0.1 - Login Admin

192.168.0.1 IP Address

To access the admin page type 192.168.0.1 into your web browser's address bar or click on the link below.

Based on your local ip address, this should be your router admin ip address. This is only the case if you are in the same network as your wifi router.

IP Addresses Assigned To Access Router’s Settings Page

The Internet Assigned Number Authority or IANA has kept a few IP addresses aside for various tasks other than assigning them to websites - 192.168.0.1 is one such IP, generally dedicated as a default gateway for routers.

Once this IP is entered and correct credentials are put in, the user is directed to the router’s settings page.

However, many users fail to enter the correct IP because the number “0” and the alphabet “O’ look quite similar. Therefore, at first glance, they tend to mistake the number zero as the letter O.

Also, the auto-correct option on smartphones does not make things easier – the given suggestions are often wrong.

Consequently, the entered IP to access the router’s control panel is 192.168.o.1, rather than 192.168.0.1, and they are reverted with an error page.

Following are, some frequently misspelled IP errors users make and their corrections:

Incorrect: 192.168.o.1

Correct: 192.168.0.1

Incorrect: http://192.168.o.1

Correct: http://192.168.0.1

Incorrect: https://192.168.o.1

Correct: https://192.168.0.1

Incorrect: 192.168.o.1 login

Correct: 192.168.0.1 login

The Correct Manner Of Logging Into A Router’s Control Panel

You may want to login into your router’s control panel for the following reasons:

  • Add password
  • Change password
  • Add or change the user name
  • Reset the router, etc.

The best part is that anyone can do this no matter their level of familiarity with routers - to help you understand, we have broken down each step from login until execution. 

When You Need To Access It

  1. The Login Process

    Open any browser - there is no requirement for a specific brand such as Firefox, Google Chrome, Microsoft Edge, etc. 

    Now in the search field enter the correct IP, i.e., 192.168.0.1, and make sure you are not entering a misspelled IP i.e., 192.168.o.1

    If the correct IP has been entered, you will be directed to a login page – enter your login credentials, i.e., the given username or password (these can be found on the router’s box, manual, and at the back of the router, etc.).

  2. Resetting The Router And Password Changes

    If your internet connection is not working at its full potential or generating enough speed, it could be due to server downtime or other issues at the internet service provider’s end, or it can be due to problems with the router.

    If the issue is not with the provider, you should consider restarting your router manually – switch it off and then turn it back on.

    If the issue persists, reboot the router from the settings page or carry out a factory reset – a reboot that restores your router to its initial out-of-the-box state.

    Also, you may have come across many Wi-Fi connections with unique names, instead of conventional router names such as Netgear, Tenda, etc. This name change can be easily carried out on the settings page.

    Remember, cybercriminals can use Wi-Fi connections to access all your vital information – login credentials, credit card information, social security numbers, etc. 

    You can control who accesses the Wi-Fi by putting a password or by allowing access to only specific devices.

    This can be done from the control panel - simply change the old password that may have been breached, to halt unwanted traffic.

  3. Configure

    When you have successfully made changes to your router’s settings, carry out the following steps:

    - Log-out from the settings page

    - Restart the router 

Routers Coming With 192.168.0.1 As A Default IP Address

No doubt, seeing an error page after entering a misspelled IP such as 192.168.o.1 can be downright irritating.

The issue is typically faced by those using routers from these brands:

  • D-Link
  • Actiontek
  • Arris
  • Netgear
  • Tenda

This is because these devices come assigned with 192.168.0.1 as a default gateway to access the dashboard.

However, if you are unsure about what IP is assigned to your router, it can easily be located. In the Command Prompt enter ipconfig, and press enter to see a list of IP addresses.

Look for an IP address that says Default Gateway next to it – this is your router’s IP, please read it correctly so you do not end up entering a misspelled IP like 192.168.o.1

Brands using 192.168.0.1

FAQ IP adddress

1. What is 192.168.o.1.1?

192.168.0.1 is a default IP address. The IP address always contains 4 sets of numbers ranging between 0 and 255. This is because each device connected to the internet is supposed to have a unique address. So, the first three sets are the network id, and the last set is the device id. In 192.168.0.1 the network id is 192 and the device id is 168.0.1


2. How to log in to 192.168.o.1.1 / How to login into 192.168.o.1.1 / How to use 192.168.o.1.1

First, type 192.168.0.1 in your browser’s address bar. Then, enter username and password, and then click OK or Login.


3. What are the (most common) default logins for 192.168.o.1.1?

The most common default logins for 192.168.0.1 IP address are Username: admin, Password: admin


4. What is the (most common) default username for 192.168.o.1.1?

The most common default username for 192.168.0.1 address is admin


5. What is the (most common) default password for 192.168.o.1.1?

The most common default password for 192.168.0.1 address is admin


6. 192.168.o.1.1 - How to Access Router IP Address?

First, type 192.168.0.1 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN.
The most common default logins to access 192.168.0.1 are - username: admin, password: admin


7. How to login into 192.168.o.1.1 / Hot to go to 192.168.o.1.1 / How to use 192.168.o.1.1

First, type 192.168.0.1 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN.
The most common default logins to access 192.168.0.1 are - username: admin, password: admin